Product information
1. Fill the tub with water (if an electric tub; through a filter chamber).
2. Heat the water to at least 30°C.
3. Adjust the float hole to an appropriate setting based on the tub size (liters) and use of the tub.
4. Fill the float hole with chlorine tablets.
5. Put the float in a pot, the float must always be in the pot.
6. Check the float regularly and top up.
Note! chlorine and bromine must not be used together.
- Change the water every 2-3 months.
- Renew filters regularly (most last 3-4 months). Filters product page
- Check the "Total Alkalinity" weekly to make sure it is within the target values (80-120).
- Adjust the pH value (the acidity of the water) once a week.
Use: TEST STRIPS to check: Chlorine level, "Total Alkalinity" and pH value of the water.
Chlorine tends to lower the pH value, try to achieve a pH value between 7.2-7.6.
Use: PH-PLUS to raise the pH values.
- "Refresh" the water once a week. (important)
The following should be used: POT MIXER
